Querydsl Reference Guide

Add the following dependencies to your Maven project:

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-apt</artifactId>
  <version>${querydsl.version}</version>
  <scope>provided</scope>
</dependency>

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-jpa</artifactId>
  <version>${querydsl.version}</version>
</dependency>

<dependency>
  <groupId>org.slf4j</groupId>
  <artifactId>slf4j-log4j12</artifactId>
  <version>1.6.1</version>
</dependency>

And now, configure the Maven APT plugin:

<project>
  <build>
  <plugins>
    ...
    <plugin>
      <groupId>com.mysema.maven</groupId>
      <artifactId>apt-maven-plugin</artifactId>
      <version>1.1.3</version>
      <executions>
        <execution>
          <goals>
            <goal>process</goal>
          </goals>
          <configuration>
            <outputDirectory>target/generated-sources/java</outputDirectory>
            <processor>com.querydsl.apt.jpa.JPAAnnotationProcessor</processor>
          </configuration>
        </execution>
      </executions>
    </plugin>
    ...
  </plugins>
  </build>
</project>

The JPAAnnotationProcessor finds domain types annotated with the javax.persistence.Entity annotation and generates query types for them.

If you use Hibernate annotations in your domain types you should use the APT processor com.querydsl.apt.hibernate.HibernateAnnotationProcessor instead.

Run clean install and you will get your Query types generated into target/generated-sources/java.

If you use Eclipse, run mvn eclipse:eclipse to update your Eclipse project to include target/generated-sources/java as a source folder.

Now you are able to construct JPA query instances and instances of the query domain model.

Place the jar files from the full-deps bundle on your classpath and use the following tasks for Querydsl code generation:

    <!-- APT based code generation -->
    <javac srcdir="${src}" classpathref="cp">
      <compilerarg value="-proc:only"/>
      <compilerarg value="-processor"/>
      <compilerarg value="com.querydsl.apt.jpa.JPAAnnotationProcessor"/>
      <compilerarg value="-s"/>
      <compilerarg value="${generated}"/>
    </javac>

    <!-- compilation -->
    <javac classpathref="cp" destdir="${build}">
      <src path="${src}"/>
      <src path="${generated}"/>
    </javac>

Replace src with your main source folder, generated with your folder for generated sources and build with your target folder.

If you are using Querydsl JPA with Spring Roo you can replace com.querydsl.apt.jpa.JPAAnnotationProcessor with com.querydsl.apt.roo.RooAnnotationProcessor which will handle @RooJpaEntity and @RooJpaActiveRecord annotated classes instead of @Entity annotated classes.

APT based code generation doesn't work well with AspectJ IDTs.

If you are using Hibernate with an XML based configuration, you can use the XML metadata to create your Querydsl model.

com.querydsl.jpa.codegen.HibernateDomainExporter provides the functionality for this:

HibernateDomainExporter exporter = new HibernateDomainExporter(
  "Q",                     // name prefix
  new File("target/gen3"), // target folder
  configuration);          // instance of org.hibernate.cfg.Configuration

exporter.export();

The HibernateDomainExporter needs to be executed within a classpath where the domain types are visible, since the property types are resolved via reflection.

All JPA annotations are ignored, but Querydsl annotations such as @QueryInit and @QueryType are taken into account.

To create queries with Querydsl you need to instantiate variables and Query implementations. We will start with the variables.

Let's assume that your project has the following domain type:

@Entity
public class Customer {
    private String firstName;
    private String lastName;

    public String getFirstName() {
        return firstName;
    }

    public String getLastName() {
        return lastName;
    }

    public void setFirstName(String fn) {
        firstName = fn;
    }

    public void setLastName(String ln)[
        lastName = ln;
    }
}

Querydsl will generate a query type with the simple name QCustomer into the same package as Customer. QCustomer can be used as a statically typed variable in Querydsl queries as a representative for the Customer type.

QCustomer has a default instance variable which can be accessed as a static field:

QCustomer customer = QCustomer.customer;

Alternatively you can define your own Customer variables like this:

QCustomer customer = new QCustomer("myCustomer");

The Querydsl JPA module supports both the JPA and the Hibernate API.

To use the JPA API you use JPAQuery instances for your queries like this:

// where entityManager is a JPA EntityManager
JPAQuery<?> query = new JPAQuery<Void>(entityManager);

If you are using the Hibernate API instead, you can instantiate a HibernateQuery like this:

// where session is a Hibernate session
HibernateQuery<?> query = new HibernateQuery<Void>(session);

Both JPAQuery and HibernateQuery implement the JPQLQuery interface.

For the examples of this chapter the queries are created via a JPAQueryFactory instance. JPAQueryFactory should be the preferred option to obtain JPAQuery instances.

For the Hibernate API HibernateQueryFactory can be used

To retrieve the customer with the first name Bob you would construct a query like this:

QCustomer customer = QCustomer.customer;
Customer bob = queryFactory.selectFrom(customer)
  .where(customer.firstName.eq("Bob"))
  .fetchOne();

The selectFrom call defines the query source and projection, the where part defines the filter and fetchOne tells Querydsl to return a single element. Easy, right?

To create a query with multiple sources you use the query like this:

QCustomer customer = QCustomer.customer;
QCompany company = QCompany.company;
query.from(customer, company);

And to use multiple filters use it like this

queryFactory.selectFrom(customer)
    .where(customer.firstName.eq("Bob"), customer.lastName.eq("Wilson"));

Or like this

queryFactory.selectFrom(customer)
    .where(customer.firstName.eq("Bob").and(customer.lastName.eq("Wilson")));

In native JPQL form the query would be written like this:

select customer from Customer as customer
where customer.firstName = "Bob" and customer.lastName = "Wilson"

If you want to combine the filters via "or" then use the following pattern

queryFactory.selectFrom(customer)
    .where(customer.firstName.eq("Bob").or(customer.lastName.eq("Wilson")));

Querydsl supports the following join variants in JPQL: inner join, join, left join and right join. Join usage is typesafe, and follows the following pattern:

QCat cat = QCat.cat;
QCat mate = new QCat("mate");
QCat kitten = new QCat("kitten");
queryFactory.selectFrom(cat)
    .innerJoin(cat.mate, mate)
    .leftJoin(cat.kittens, kitten)
    .fetch();

The native JPQL version of the query would be

select cat from Cat as cat
inner join cat.mate as mate
left outer join cat.kittens as kitten

Another example

queryFactory.selectFrom(cat)
    .leftJoin(cat.kittens, kitten)
    .on(kitten.bodyWeight.gt(10.0))
    .fetch();

With the following JPQL version

select cat from Cat as cat
left join cat.kittens as kitten
on kitten.bodyWeight > 10.0

Use the the cascading methods of the JPQLQuery interface like this

select: Set the projection of the query. (Not necessary if created via query factory)

from: Add the query sources here.

innerJoin, join, leftJoin, rightJoin, on: Add join elements using these constructs. For the join methods the first argument is the join source and the second the target (alias).

where: Add query filters, either in varargs form separated via commas or cascaded via the and-operator.

groupBy: Add group by arguments in varargs form.

having: Add having filters of the "group by" grouping as an varags array of Predicate expressions.

orderBy: Add ordering of the result as an varargs array of order expressions. Use asc() and desc() on numeric, string and other comparable expression to access the OrderSpecifier instances.

limit, offset, restrict: Set the paging of the result. Limit for max results, offset for skipping rows and restrict for defining both in one call.

The syntax for declaring ordering is

QCustomer customer = QCustomer.customer;
queryFactory.selectFrom(customer)
    .orderBy(customer.lastName.asc(), customer.firstName.desc())
    .fetch();

which is equivalent to the following native JPQL

select customer from Customer as customer
order by customer.lastName asc, customer.firstName desc

Grouping can be done in the following form

queryFactory.select(customer.lastName).from(customer)
    .groupBy(customer.lastName)
    .fetch();

which is equivalent to the following native JPQL

select customer.lastName
from Customer as customer
group by customer.lastName

Delete clauses in Querydsl JPA follow a simple delete-where-execute form. Here are some examples:

QCustomer customer = QCustomer.customer;
// delete all customers
queryFactory.delete(customer).execute();
// delete all customers with a level less than 3
queryFactory.delete(customer).where(customer.level.lt(3)).execute();

The where call is optional and the execute call performs the deletion and returns the amount of deleted entities.

DML clauses in JPA don't take JPA level cascade rules into account and don't provide fine-grained second level cache interaction.

Update clauses in Querydsl JPA follow a simple update-set/where-execute form. Here are some examples:

QCustomer customer = QCustomer.customer;
// rename customers named Bob to Bobby
queryFactory.update(customer).where(customer.name.eq("Bob"))
    .set(customer.name, "Bobby")
    .execute();

The set invocations define the property updates in SQL-Update-style and the execute call performs the Update and returns the amount of updated entities.

DML clauses in JPA don't take JPA level cascade rules into account and don't provide fine-grained second level cache interaction.

To create a subquery you use the static factory methods of JPAExpressions and define the query parameters via from, where etc.

QDepartment department = QDepartment.department;
QDepartment d = new QDepartment("d");
queryFactory.selectFrom(department)
    .where(department.size.eq(
        JPAExpressions.select(d.size.max()).from(d)))
     .fetch();

Another example

QEmployee employee = QEmployee.employee;
QEmployee e = new QEmployee("e");
queryFactory.selectFrom(employee)
    .where(employee.weeklyhours.gt(
        JPAExpressions.select(e.weeklyhours.avg())
            .from(employee.department.employees, e)
            .where(e.manager.eq(employee.manager))))
    .fetch();

If you need to tune the original Query before the execution of the query you can expose it like this:

Query jpaQuery = queryFactory.selectFrom(employee).createQuery();
// ...
List results = jpaQuery.getResultList();

Querydsl supports Native SQL in JPA via the JPASQLQuery class.

To use it, you must generate Querydsl query types for your SQL schema. This can be done for example with the following Maven configuration:

<project>
  <build>
    <plugins>
      ...
      <plugin>
        <groupId>com.querydsl</groupId>
        <artifactId>querydsl-maven-plugin</artifactId>
        <version>${querydsl.version}</version>
        <executions>
          <execution>
            <goals>
              <goal>export</goal>
            </goals>
          </execution>
        </executions>
        <configuration>
          <jdbcDriver>org.apache.derby.jdbc.EmbeddedDriver</jdbcDriver>
          <jdbcUrl>jdbc:derby:target/demoDB;create=true</jdbcUrl>
          <packageName>com.mycompany.mydomain</packageName>
          <targetFolder>${project.basedir}/target/generated-sources/java</targetFolder>
        </configuration>
        <dependencies>
          <dependency>
            <groupId>org.apache.derby</groupId>
            <artifactId>derby</artifactId>
            <version>${derby.version}</version>
          </dependency>
        </dependencies>
      </plugin>
      ...
    </plugins>
  </build>
</project>

When the query types have successfully been generated into the location of your choice, you can use them in your queries.

Single column query:

// serialization templates
SQLTemplates templates = new DerbyTemplates();
// query types (S* for SQL, Q* for domain types)
SAnimal cat = new SAnimal("cat");
SAnimal mate = new SAnimal("mate");
QCat catEntity = QCat.cat;

JPASQLQuery<?> query = new JPASQLQuery<Void>(entityManager, templates);
List<String> names = query.select(cat.name).from(cat).fetch();

If you mix entity (e.g. QCat) and table (e.g. SAnimal) references in your query you need to make sure that they use the same variable names. SAnimal.animal has the variable name "animal", so a new instance (new SAnimal("cat")) was used instead.

An alternative pattern could be

QCat catEntity = QCat.cat;
SAnimal cat = new SAnimal(catEntity.getMetadata().getName());

Query multiple columns:

query = new JPASQLQuery<Void>(entityManager, templates);
List<Tuple> rows = query.select(cat.id, cat.name).from(cat).fetch();

Query all columns:

List<Tuple> rows = query.select(cat.all()).from(cat).fetch();
 

Query in SQL, but project as entity:

query = new JPASQLQuery<Void>(entityManager, templates);
List<Cat> cats = query.select(catEntity).from(cat).orderBy(cat.name.asc()).fetch();

Query with joins:

query = new JPASQLQuery<Void>(entityManager, templates);
cats = query.select(catEntity).from(cat)
    .innerJoin(mate).on(cat.mateId.eq(mate.id))
    .where(cat.dtype.eq("Cat"), mate.dtype.eq("Cat"))
    .fetch();

Query and project into DTO:

query = new JPASQLQuery<Void>(entityManager, templates);
List<CatDTO> catDTOs = query.select(Projections.constructor(CatDTO.class, cat.id, cat.name))
    .from(cat)
    .orderBy(cat.name.asc())
    .fetch();

If you are using the Hibernate API instead of the JPA API, then use HibernateSQLQuery instead.

Add the following dependencies to your Maven project:

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-apt</artifactId>
  <version>${querydsl.version}</version>
  <scope>provided</scope>
</dependency>

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-jdo</artifactId>
  <version>${querydsl.version}</version>
</dependency>

<dependency>
  <groupId>org.slf4j</groupId>
  <artifactId>slf4j-log4j12</artifactId>
  <version>1.6.1</version>
</dependency>

And now, configure the Maven APT plugin which generates the query types used by Querydsl:

<project>
  <build>
    <plugins>
      ...
      <plugin>
        <groupId>com.mysema.maven</groupId>
        <artifactId>apt-maven-plugin</artifactId>
        <version>1.1.3</version>
        <executions>
          <execution>
            <goals>
              <goal>process</goal>
            </goals>
            <configuration>
              <outputDirectory>target/generated-sources/java</outputDirectory>
              <processor>com.querydsl.apt.jdo.JDOAnnotationProcessor</processor>
            </configuration>
          </execution>
        </executions>
      </plugin>
    ...
    </plugins>
  </build>
</project>

The JDOAnnotationProcessor finds domain types annotated with the javax.jdo.annotations.PersistenceCapable annotation and generates query types for them.

Run clean install and you will get your query types generated into target/generated-sources/java.

If you use Eclipse, run mvn eclipse:eclipse to update your Eclipse project to include target/generated-sources/java as a source folder.

Now you are able to construct JDO query instances and instances of the query domain model.

Place the jar files from the full-deps bundle on your classpath and use the following tasks for Querydsl code generation:

    <!-- APT based code generation -->
    <javac srcdir="${src}" classpathref="cp">
      <compilerarg value="-proc:only"/>
      <compilerarg value="-processor"/>
      <compilerarg value="com.querydsl.apt.jdo.JDOAnnotationProcessor"/>
      <compilerarg value="-s"/>
      <compilerarg value="${generated}"/>
    </javac>

    <!-- compilation -->
    <javac classpathref="cp" destdir="${build}">
      <src path="${src}"/>
      <src path="${generated}"/>
    </javac>

Replace src with your main source folder, generated with your folder for generated sources and build with your target folder.

To create queries with Querydsl you need to instantiate variables and Query implementations. We will start with the variables.

Let's assume that your project has the following domain type:

@PersistenceCapable
public class Customer {
  private String firstName;
  private String lastName;

  public String getFirstName() {
    return firstName;
  }

  public String getLastName() {
    return lastName;
  }

  public void setFirstName(String fn) {
    firstName = fn;
  }

  public void setLastName(String ln) {
    lastName = ln;
  }
}

Querydsl will generate a query type with the simple name QCustomer into the same package as Customer. QCustomer can be used as a statically typed variable in Querydsl as a representative for the Customer type.

QCustomer has a default instance variable which can be accessed as a static field:

QCustomer customer = QCustomer.customer;

Alternatively you can define your own Customer variables like this:

QCustomer customer = new QCustomer("myCustomer");

QCustomer reflects all the properties of the original type Customer as public fields. The firstName field can be accessed like this

customer.firstName;

For the JDO-module JDOQuery is the main Query implementation. It is instantiated like this:

PersistenceManager pm = ...;
JDOQuery<?> query = new JDOQuery<Void>(pm);

For the examples of this chapter the queries are created via a JDOQueryFactory instance. JDOQueryFactory should be the preferred option to obtain JDOQuery instances.

To retrieve the customer with the first name Bob you would construct a query like this:

QCustomer customer = QCustomer.customer;
Customer bob = queryFactory.selectFrom(customer)
                   .where(customer.firstName.eq("Bob"))
                   .fetchOne();

The selectFrom call defines the query source and projection, the where part defines the filter and fetchOne tells Querydsl to return a single element. Easy, right?

Alternatively you can express it also like this

QCustomer customer = QCustomer.customer;
Customer bob = queryFactory.select(customer).from(customer)
                   .where(customer.firstName.eq("Bob"))
                   .fetchOne();

To create a query with multiple sources you just use the JDOQuery class like this:

QCustomer customer = QCustomer.customer;
QCompany company = QCompany.company;
query.from(customer, company);

And to use multiple filters use it like this

queryFactory.selectFrom(customer)
    .where(customer.firstName.eq("Bob"), customer.lastName.eq("Wilson"));

Or like this

queryFactory.selectFrom(customer)
    .where(customer.firstName.eq("Bob").and(customer.lastName.eq("Wilson")));

If you want to combine the filters via "or" then use the following pattern

queryFactory.selectFrom(customer)
    .where(customer.firstName.eq("Bob").or(customer.lastName.eq("Wilson")));

Use the the cascading methods of the JDOQuery class like this

select: Set the projection of the query. (Not necessary if created via query factory)

from: Add query sources here, the first argument becomes the main source and the others are treated as variables.

where: Add query filters, either in varargs form separated via commas or cascaded via the and-operator.

groupBy: Add group by arguments in varargs form.

having: Add having filters of the "group by" grouping as an varargs array of Predicate expressions.

orderBy: Add ordering of the result as an varargs array of order expressions. Use asc() and desc() on numeric, string and other comparable expression to access the OrderSpecifier instances.

limit, offset, restrict: Set the paging of the result. Limit for max results, offset for skipping rows and restrict for defining both in one call.

The syntax for declaring ordering is

QCustomer customer = QCustomer.customer;
queryFactory.selectFrom(customer)
    .orderBy(customer.lastName.asc(), customer.firstName.desc())
    .fetch();

Grouping can be done in the following form

queryFactory.select(customer.lastName).from(customer)
    .groupBy(customer.lastName)
    .fetch();

Delete clauses in Querydsl JDO follow a simple delete-where-execute form. Here are some examples:

QCustomer customer = QCustomer.customer;
// delete all customers
queryFactory.delete(customer).execute();
// delete all customers with a level less than 3
queryFactory.delete(customer).where(customer.level.lt(3)).execute();

The second parameter of the JDODeleteClause constructor is the entity to be deleted. The where call is optional and the execute call performs the deletion and returns the amount of deleted entities.

To create a subquery you can use one of the factory methods of JDOExpressions and add the query parameters via from, where etc.

QDepartment department = QDepartment.department;
QDepartment d = new QDepartment("d");
queryFactory.selectFrom(department)
    .where(department.size.eq(JDOExpressions.select(d.size.max()).from(d))
    .fetch();

represents the following native JDO query

SELECT this FROM com.querydsl.jdo.models.company.Department
WHERE this.size ==
(SELECT max(d.size) FROM com.querydsl.jdo.models.company.Department d)
    

Another example

QEmployee employee = QEmployee.employee;
QEmployee e = new QEmployee("e");
queryFactory.selectFrom(employee)
    .where(employee.weeklyhours.gt(
        JDOExpressions.select(e.weeklyhours.avg())
                      .from(employee.department.employees, e)
                      .where(e.manager.eq(employee.manager)))
    .fetch();

which represents the following native JDO query

SELECT this FROM com.querydsl.jdo.models.company.Employee
WHERE this.weeklyhours >
(SELECT avg(e.weeklyhours) FROM this.department.employees e WHERE e.manager == this.manager)
    

Querydsl supports Native SQL in JDO via the JDOSQLQuery class.

To use it, you must generate Querydsl query types for your SQL schema. This can be done for example with the following Maven configuration:

<project>
  <build>
    <plugins>
      ...
      <plugin>
        <groupId>com.querydsl</groupId>
        <artifactId>querydsl-maven-plugin</artifactId>
        <version>${querydsl.version}</version>
        <executions>
          <execution>
            <goals>
              <goal>export</goal>
            </goals>
          </execution>
        </executions>
        <configuration>
          <jdbcDriver>org.apache.derby.jdbc.EmbeddedDriver</jdbcDriver>
          <jdbcUrl>jdbc:derby:target/demoDB;create=true</jdbcUrl>
          <packageName>com.mycompany.mydomain</packageName>
          <targetFolder>${project.basedir}/target/generated-sources/java</targetFolder>
        </configuration>
        <dependencies>
          <dependency>
            <groupId>org.apache.derby</groupId>
            <artifactId>derby</artifactId>
            <version>${derby.version}</version>
          </dependency>
        </dependencies>
      </plugin>
      ...
    </plugins>
  </build>
</project>

When the query types have successfully been generated into the location of your choice, you can use them in your queries.

Single column query:

// serialization templates
SQLTemplates templates = new DerbyTemplates();
// query types (S* for SQL, Q* for domain types)
SAnimal cat = new SAnimal("cat");
SAnimal mate = new SAnimal("mate");

JDOSQLQuery<?> query = new JDOSQLQuery<Void>(pm, templates);
List<String> names = query.select(cat.name).from(cat).fetch();

Query multiple columns:

query = new JDOSQLQuery<Void>(pm, templates);
List<Tuple> rows = query.select(cat.id, cat.name).from(cat).fetch();

Query all columns:

List<Tuple> rows = query.select(cat.all()).from(cat).fetch();
 

Query with joins:

query = new JDOSQLQuery<Void>(pm, templates);
cats = query.select(catEntity).from(cat)
    .innerJoin(mate).on(cat.mateId.eq(mate.id))
    .where(cat.dtype.eq("Cat"), mate.dtype.eq("Cat"))
    .fetch();

Query and project into DTO:

query = new JDOSQLQuery<Void>(pm, templates);
List<CatDTO> catDTOs = query.select(Projections.constructor(CatDTO.class, cat.id, cat.name))
    .from(cat)
    .orderBy(cat.name.asc())
    .fetch();

Add the following dependencies to your Maven project:

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-sql</artifactId>
  <version>${querydsl.version}</version>
</dependency>

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-sql-codegen</artifactId>
  <version>${querydsl.version}</version>
  <scope>provided</scope>
</dependency>

<dependency>
  <groupId>org.slf4j</groupId>
  <artifactId>slf4j-log4j12</artifactId>
  <version>1.6.1</version>
</dependency>

The querydsl-sql-codegen dependency can be skipped, if code generation happens via Maven.

This functionality should be primarily used via the Maven plugin. Here is an example:

<project>
  <build>
    <plugins>
      ...
      <plugin>
        <groupId>com.querydsl</groupId>
        <artifactId>querydsl-maven-plugin</artifactId>
        <version>${querydsl.version}</version>
        <executions>
          <execution>
            <goals>
              <goal>export</goal>
            </goals>
          </execution>
        </executions>
        <configuration>
          <jdbcDriver>org.apache.derby.jdbc.EmbeddedDriver</jdbcDriver>
          <jdbcUrl>jdbc:derby:target/demoDB;create=true</jdbcUrl>
          <packageName>com.myproject.domain</packageName>
          <targetFolder>${project.basedir}/target/generated-sources/java</targetFolder>
        </configuration>
        <dependencies>
          <dependency>
            <groupId>org.apache.derby</groupId>
            <artifactId>derby</artifactId>
            <version>${derby.version}</version>
          </dependency>
        </dependencies>
      </plugin>
      ...
    </plugins>
  </build>
</project>

Use the goal test-export to treat the target folder as a test source folder for use with test code.

Custom types can be used to register additional Type implementations:

<customTypes>
  <customType>com.querydsl.sql.types.InputStreamType</customType>
</customTypes>

Type mappings can be used to register table.column specific java types:

<typeMappings>
  <typeMapping>
    <table>IMAGE</table>
    <column>CONTENTS</column>
    <type>java.io.InputStream</type>
  </typeMapping>
</typeMappings>

The defaults for the numeric mappings are

They can be customized for specific total/decimal digits combinations like this:

<numericMappings>
  <numericMapping>
    <total>1</total>
    <decimal>0</decimal>
    <javaType>java.lang.Byte</javaType>
  </numericMapping>
</numericMappings>

Imports can be used to add cross-schema foreign keys support.

Schemas, tables and columns can also be renamed using the plugin. Here are some examples:

Renaming a schema:

<renameMappings>
  <renameMapping>
    <fromSchema>PROD</fromSchema>
    <toSchema>TEST</toSchema>
  </renameMapping>
</renameMappings>

Renaming a table:

<renameMappings>
  <renameMapping>
    <fromSchema>PROD</fromSchema>
    <fromTable>CUSTOMER</fromTable>
    <toTable>CSTMR</toTable>
  </renameMapping>
</renameMappings>

Renaming a column:

<renameMappings>
  <renameMapping>
    <fromSchema>PROD</fromSchema>
    <fromTable>CUSTOMER</fromTable>
    <fromColumn>ID</fromColumn>
    <toColumn>IDX</toTable>
  </renameMapping>
</renameMappings>

Note: fromSchema can be omitted when renaming tables and columns.

Compared to APT based code generation certain functionality is not available such as QueryDelegate annotation handling.

The ANT task com.querydsl.sql.codegen.ant.AntMetaDataExporter of the querydsl-sql module provides the same functionality as an ANT task. The configuration parameters of the task are the same as for the Maven plugin, except for the composite types.

The composite types are used without the wrapper element like in this example.

<project name="testproject" default="codegen" basedir=".">

  <taskdef name="codegen" classname="com.querydsl.sql.codegen.ant.AntMetaDataExporter"/>

  <target name="codegen">
    <codegen
      jdbcDriver="org.h2.Driver"
      jdbcUser="sa"
      jdbcUrl="jdbc:h2:/dbs/db1"
      packageName="test"
      targetFolder="target/generated-sources/java">
      <renameMapping fromSchema="PUBLIC" toSchema="PUB"/>
    </codegen>
  </target>
</project>

To get started export your schema into Querydsl query types like this:

java.sql.Connection conn = ...;
MetaDataExporter exporter = new MetaDataExporter();
exporter.setPackageName("com.myproject.mydomain");
exporter.setTargetFolder(new File("target/generated-sources/java"));
exporter.export(conn.getMetaData());

This declares that the database schema is to be mirrored into the com.myproject.domain package in the target/generated-sources/java folder.

The generated types have the table name transformed to mixed case as the class name and a similar mixed case transformation applied to the columns which are available as property paths in the query type.

In addition to this primary key and foreign key constraints are provided as fields which can be used for compact join declarations.

The configuration is done via the com.querydsl.sql.Configuration class which takes the Querydsl SQL dialect as an argument. For H2 you would create it like this

SQLTemplates templates = new H2Templates();
Configuration configuration = new Configuration(templates);

Querydsl uses SQL dialects to customize the SQL serialization needed for different relational databases. The available dialects are:

For customized SQLTemplates instances you can use the builder pattern like this

  H2Templates.builder()
     .printSchema() // to include the schema in the output
     .quote()       // to quote names
     .newLineToSingleSpace() // to replace new lines with single space in the output
     .escape(ch)    // to set the escape char
     .build();      // to get the customized SQLTemplates instance

The methods of the Configuration class can be used to enable direct serialization of literals via setUseLiterals(true), override schema and tables and register custom types. For full details look at the javadocs of Configuration.

For the following examples we will be using the SQLQueryFactory class for query creation. Using it results in more concise code compared to constructor based query creation.

SQLQueryFactory queryFactory = new SQLQueryFactory(configuration, dataSource);

Querying with Querydsl SQL is as simple as this:

QCustomer customer = new QCustomer("c");

List<String> lastNames = queryFactory.select(customer.lastName).from(customer)
    .where(customer.firstName.eq("Bob"))
    .fetch();

which is transformed into the following sql query, assuming that the related table name is customer and the columns first_name and last_name:

SELECT c.last_name
FROM customer c
WHERE c.first_name = 'Bob'

Use the the cascading methods of the SQLQuery class like this

select: Set the projection of the query. (Not necessary if created via query factory)

from: Add the query sources here.

innerJoin, join, leftJoin, rightJoin, fullJoin, on: Add join elements using these constructs. For the join methods the first argument is the join source and the second the target (alias).

where: Add query filters, either in varargs form separated via commas or cascaded via the and-operator.

groupBy: Add group by arguments in varargs form.

having: Add having filter of the "group by" grouping as an varags array of Predicate expressions.

orderBy: Add ordering of the result as an varargs array of order expressions. Use asc() and desc() on numeric, string and other comparable expression to access the OrderSpecifier instances.

limit, offset, restrict: Set the paging of the result. Limit for max results, offset for skipping rows and restrict for defining both in one call.

Joins are constructed using the following syntax:

QCustomer customer = QCustomer.customer;
QCompany company = QCompany.company;
queryFactory.select(customer.firstName, customer.lastName, company.name)
    .from(customer)
    .innerJoin(customer.company, company)
    .fetch();

and for a left join:

queryFactory.select(customer.firstName, customer.lastName, company.name)
    .from(customer)
    .leftJoin(customer.company, company)
    .fetch();

Alternatively the join condition can also be written out:

queryFactory.select(customer.firstName, customer.lastName, company.name)
    .from(customer)
    .leftJoin(company).on(customer.company.eq(company))
    .fetch();

The syntax for declaring ordering is

queryFactory.select(customer.firstName, customer.lastName)
    .from(customer)
    .orderBy(customer.lastName.asc(), customer.firstName.asc())
    .fetch();

which is equivalent to the following native SQL

SELECT c.first_name, c.last_name
FROM customer c
ORDER BY c.last_name ASC, c.first_name ASC

Grouping can be done in the following form

queryFactory.select(customer.lastName)
    .from(customer)
    .groupBy(customer.lastName)
    .fetch();

which is equivalent to the following native SQL

SELECT c.last_name
FROM customer c
GROUP BY c.last_name

To create a subquery you can use one of the factory methods of SQLExpressions and add the query parameters via from, where etc.

QCustomer customer = QCustomer.customer;
QCustomer customer2 = new QCustomer("customer2");
queryFactory.select(customer.all())
    .from(customer)
    .where(customer.status.eq(
        SQLExpressions.select(customer2.status.max()).from(customer2)))
    .fetch()

Another example

QStatus status = QStatus.status;
queryFactory.select(customer.all())
    .from(customer)
    .where(customer.status.in(
        SQLExpressions.select(status.id).from(status).where(status.level.lt(3))))
    .fetch();

To select literals you need to create constant instances for them like this:

queryFactory.select(Expressions.constant(1),
                    Expressions.constant("abc"));

The class com.querydsl.core.types.dsl.Expressions offers also other useful static methods for projections, operation and template creation.

Custom query extensions to support engine specific syntax can be created by subclassing AbstractSQLQuery and adding flagging methods like in the given MySQLQuery example:

public class MySQLQuery<T> extends AbstractSQLQuery<T, MySQLQuery<T>> {

    public MySQLQuery(Connection conn) {
        this(conn, new MySQLTemplates(), new DefaultQueryMetadata());
    }

    public MySQLQuery(Connection conn, SQLTemplates templates) {
        this(conn, templates, new DefaultQueryMetadata());
    }

    protected MySQLQuery(Connection conn, SQLTemplates templates, QueryMetadata metadata) {
        super(conn, new Configuration(templates), metadata);
    }

    public MySQLQuery bigResult() {
        return addFlag(Position.AFTER_SELECT, "SQL_BIG_RESULT ");
    }

    public MySQLQuery bufferResult() {
        return addFlag(Position.AFTER_SELECT, "SQL_BUFFER_RESULT ");
    }


    // ...
}

The flags are custom SQL snippets that can be inserted at specific points in the serialization. The supported positions are the enums of the com.querydsl.core.QueryFlag.Position enum class.

Window functions are supported in Querydsl via the methods in the SQLExpressions class.

Usage example:

queryFactory.select(SQLExpressions.rowNumber()
        .over()
        .partitionBy(employee.name)
        .orderBy(employee.id))
     .from(employee)

Common table expressions are supported in Querydsl SQL via two syntax variants

QEmployee employee = QEmployee.employee;
queryFactory.with(employee, SQLExpressions.select(employee.all)
                                          .from(employee)
                                          .where(employee.name.startsWith("A")))
            .from(...)

And using a column listing

QEmployee employee = QEmployee.employee;
queryFactory.with(employee, employee.id, employee.name)
            .as(SQLExpressions.select(employee.id, employee.name)
                              .from(employee)
                              .where(employee.name.startsWith("A")))
            .from(...)

If the columns of the common table expression are a subset of an existing table or view it is advisable to use a generated path type for it, e.g. QEmployee in this case, but if the columns don't fit any existing table PathBuilder can be used instead.

Below is an example for such a case

QEmployee employee = QEmployee.employee;
QDepartment department = QDepartment.department;
PathBuilder<Tuple> emp = new PathBuilder<Tuple>(Tuple.class, "emp");
queryFactory.with(emp, SQLExpressions.select(employee.id, employee.name, employee.departmentId,
                                          department.name.as("departmentName"))
                                      .from(employee)
                                      .innerJoin(department).on(employee.departmentId.eq(department.id))))
            .from(...)

Other SQL expressions are also available from the SQLExpressions class as static methods.

Querydsl SQL supports usage of JDBC batch updates through the DML APIs. If you have consecutive DML calls with a similar structure, you can bundle the the calls via addBatch() usage into one DMLClause. See the examples how it works for UPDATE, DELETE and INSERT.

Update:

QSurvey survey = QSurvey.survey;

queryFactory.insert(survey).values(2, "A").execute();
queryFactory.insert(survey).values(3, "B").execute();

SQLUpdateClause update = queryFactory.update(survey);
update.set(survey.name, "AA").where(survey.name.eq("A")).addBatch();
update.set(survey.name, "BB").where(survey.name.eq("B")).addBatch();

Delete:

queryFactory.insert(survey).values(2, "A").execute();
queryFactory.insert(survey).values(3, "B").execute();

SQLDeleteClause delete = queryFactory.delete(survey);
delete.where(survey.name.eq("A")).addBatch();
delete.where(survey.name.eq("B")).addBatch();
assertEquals(2, delete.execute());

Insert:

SQLInsertClause insert = queryFactory.insert(survey);
insert.set(survey.id, 5).set(survey.name, "5").addBatch();
insert.set(survey.id, 6).set(survey.name, "6").addBatch();
assertEquals(2, insert.execute());

To create JavaBean DTO types for the tables of your schema use the MetaDataExporter like this:

java.sql.Connection conn = ...;
MetaDataExporter exporter = new MetaDataExporter();
exporter.setPackageName("com.myproject.mydomain");
exporter.setTargetFolder(new File("src/main/java"));
exporter.setBeanSerializer(new BeanSerializer());
exporter.export(conn.getMetaData());

Now you can use the bean types as arguments to the populate method in DML clauses and you can project directly to bean types in queries. Here is a simple example in JUnit form:

QEmployee e = new QEmployee("e");

// Insert
Employee employee = new Employee();
employee.setFirstname("John");
Integer id = queryFactory.insert(e).populate(employee).executeWithKey(e.id);
employee.setId(id);

// Update
employee.setLastname("Smith");
assertEquals(1l, queryFactory.update(e).populate(employee).where(e.id.eq(employee.getId())).execute());

// Query
Employee smith = queryFactory.selectFrom(e).where(e.lastname.eq("Smith")).fetchOne();
assertEquals("John", smith.getFirstname());

// Delete
assertEquals(1l, queryFactory.delete(e).where(e.id.eq(employee.getId())).execute());

The SQL query and bindings can be extracted via the getSQL method:

SQLBindings bindings = query.getSQL();
System.out.println(bindings.getSQL());

If you need also all literals in the SQL string you can enable literal serialization on the query or configuration level via setUseLiterals(true).

Querydsl SQL provides the possibility to declare custom type mappings for ResultSet/Statement interaction. The custom type mappings can be declared in com.querydsl.sql.Configuration instances, which are supplied as constructor arguments to the actual queries:

Configuration configuration = new Configuration(new H2Templates());
// overrides the mapping for Types.DATE
configuration.register(new UtilDateType());

And for a table column

Configuration configuration = new Configuration(new H2Templates());
// declares a mapping for the gender column in the person table
configuration.register("person", "gender",  new EnumByNameType<Gender>(Gender.class));

To customize a numeric mapping you can use the registerNumeric method like this

configuration.registerNumeric(5,2,Float.class);

This will map the Float type to the NUMERIC(5,2) type.

SQLListener is a listener interface that can be used to listen to queries and DML clause. SQLListener instances can be registered either on the configuration and on the query/clause level via the addListener method.

Use cases for listeners are data synchronization, logging, caching and validation.

Querydsl SQL integrates with Spring through the querydsl-sql-spring module:

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-sql-spring</artifactId>
  <version>${querydsl.version}</version>
</dependency>

It provides Spring exception translation and a Spring connection provider for usage of Querydsl SQL with Spring transaction managers. Below is a configuration example:

package com.querydsl.example.config;

import com.querydsl.sql.H2Templates;
import com.querydsl.sql.SQLQueryFactory;
import com.querydsl.sql.SQLTemplates;
import com.querydsl.sql.spring.SpringConnectionProvider;
import com.querydsl.sql.spring.SpringExceptionTranslator;
import com.querydsl.sql.types.DateTimeType;
import com.querydsl.sql.types.LocalDateType;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.context.annotation.PropertySource;
import org.springframework.core.env.Environment;
import org.springframework.jdbc.datasource.DataSourceTransactionManager;
import org.springframework.transaction.PlatformTransactionManager;

import javax.inject.Inject;
import javax.inject.Provider;
import javax.sql.DataSource;
import java.sql.Connection;

@Configuration
public class JdbcConfiguration {

    @Bean
    public DataSource dataSource() {
        // implementation omitted
    }

    @Bean
    public PlatformTransactionManager transactionManager() {
        return new DataSourceTransactionManager(dataSource());
    }

    @Bean
    public com.querydsl.sql.Configuration querydslConfiguration() {
        SQLTemplates templates = H2Templates.builder().build(); //change to your Templates
        com.querydsl.sql.Configuration configuration = new com.querydsl.sql.Configuration(templates);
        configuration.setExceptionTranslator(new SpringExceptionTranslator());
        return configuration;
    }

    @Bean
    public SQLQueryFactory queryFactory() {
        Provider<Connection> provider = new SpringConnectionProvider(dataSource());
        return new SQLQueryFactory(querydslConfiguration(), provider);
    }

}

Add the following dependency to your Maven project:

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-sql-spatial</artifactId>
  <version>${querydsl.version}</version>
</dependency>

Additionally the following database specific extra dependencies:

<!-- for PostgreSQL usage -->
<dependency>
  <groupId>org.postgis</groupId>
  <artifactId>postgis-jdbc</artifactId>
  <version>1.3.3</version>
  <scope>provided</scope>
</dependency>

<!-- for Oracle usage -->
<dependency>
  <groupId>oracle</groupId>
  <artifactId>sdoapi</artifactId>
  <version>11.2.0</version>
  <scope>provided</scope>
</dependency>

The code generation for Querydsl SQL can be set to detect the usage of spatial types in database schemas and use geolatte types in these case via the spatial property:

<project>
  <build>
    <plugins>
      ...
      <plugin>
        <groupId>com.querydsl</groupId>
        <artifactId>querydsl-maven-plugin</artifactId>
        <version>${querydsl.version}</version>
        ...
        <configuration>
          ...
          <spatial>true</spatial>
        </configuration>
      </plugin>
      ...
    </plugins>
  </build>
</project>

The runtime configuration aspect of the spatial module is that instead of the normal SQLTemplates instances, spatial enabled instances are used. Below is a list of spatial enabled SQLTemplates classes.

With code generation and runtime configuration set for spatial types we can now try queries with it.

Geometry point = Wkt.fromWkt("Point(2 2)");
query.where(table.geo.distance(point).lt(5.0));

Geometry point = Wkt.fromWkt("Point(2 2)");
query.where(table.geo.contains(point));

Geometry geo = query.select(table.geo1.intersection(table.geo2)).fetchOne();

QSpatialRefSys spatialRefSys = QSpatialRefSys.spatialRefSys;
List<SpatialRefSys> referenceSystems = query.select(spatialRefSys).from(spatialRefSys).fetch();

In case you use only generic geometry types in your database schema you can use conversion methods in the object model to convert to more specific types.

GeometryPath<Geometry> geometry = shapes.geometry;
PointPath<Point> point = geometry.asPoint();
NumberExpression<Double> pointX = point.x(); // x() is not available on GeometryExpression/GeometryPath

Querydsl Lucene can be used via the querydsl-lucene3 module for Lucene 3, querydsl-lucene4 for Lucene 4 and querydsl-lucene5 for Lucene 5

Lucene 3:

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-lucene3</artifactId>
  <version>${querydsl.version}</version>
</dependency>

<dependency>
  <groupId>org.slf4j</groupId>
  <artifactId>slf4j-log4j12</artifactId>
  <version>1.6.1</version>
</dependency>

Lucene 4:

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-lucene4</artifactId>
  <version>${querydsl.version}</version>
</dependency>

<dependency>
  <groupId>org.slf4j</groupId>
  <artifactId>slf4j-log4j12</artifactId>
  <version>1.6.1</version>
</dependency>

Lucene 5:

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-lucene5</artifactId>
  <version>${querydsl.version}</version>
</dependency>

<dependency>
  <groupId>org.slf4j</groupId>
  <artifactId>slf4j-log4j12</artifactId>
  <version>1.6.1</version>
</dependency>

With fields year and title a manually created query type could look something like this:

public class QDocument extends EntityPathBase<Document> {
    private static final long serialVersionUID = -4872833626508344081L;

    public QDocument(String var) {
        super(Document.class, PathMetadataFactory.forVariable(var));
    }

    public final StringPath year = createString("year");

    public final StringPath title = createString("title");
}

QDocument represents a Lucene document with the fields year and title.

Code generation is not available for Lucene, since no schema data is available.

Querying with Querydsl Lucene is as simple as this:

QDocument doc = new QDocument("doc");

IndexSearcher searcher = new IndexSearcher(index);
LuceneQuery query = new LuceneQuery(true, searcher);
List<Document> documents = query
    .where(doc.year.between("1800", "2000").and(doc.title.startsWith("Huckle"))
    .fetch();

which is transformed into the following Lucene query:

+year:[1800 TO 2000] +title:huckle*

Use the the cascading methods of the LuceneQuery class like this

where: Add the query filters, either in varargs form separated via commas or cascaded via the and-operator. Supported operations are operations performed on PStrings except matches , indexOf , charAt . Currently in is not supported, but will be in the future.

orderBy: Add ordering of the result as an varargs array of order expressions. Use asc() and desc() on numeric, string and other comparable expression to access the OrderSpecifier instances.

limit, offset, restrict: Set the paging of the result. Limit for max results, offset for skipping rows and restrict for defining both in one call.

The syntax for declaring ordering is

query
    .where(doc.title.like("*"))
    .orderBy(doc.title.asc(), doc.year.desc())
    .fetch();

which is equivalent to the following Lucene query

title:*

The results are sorted ascending based on title and year.

Alternatively a sort method call can be used to declare the sort logic as a Sort instance instead

Sort sort = ...;
query
    .where(doc.title.like("*"))
    .sort(sort)
    .fetch();

The syntax for declaring a limit is

query
    .where(doc.title.like("*"))
    .limit(10)
    .fetch();

The syntax for declaring an offset is

query
    .where(doc.title.like("*"))
    .offset(3)
    .fetch();

Fuzzy searches can be expressed via fuzzyLike methods in the com.querydsl.lucene3.LuceneExpressions class:

query
    .where(LuceneExpressions.fuzzyLike(doc.title, "Hello"))
    .fetch();

It is possible to apply a single Lucene filter to the query like this:

query
    .where(doc.title.like("*"))
    .filter(filter)
    .fetch();

A shortcut for distinct filtering is provided via the distinct(Path) method:

query
    .where(doc.title.like("*"))
    .distinct(doc.title)
    .fetch();

See Querying JPA/Hibernate sources for instructions on how to create query types.

Querying with Querydsl Hibernate Search is as simple as this:

QUser user = QUser.user;
SearchQuery<User> query = new SearchQuery<User>(session, user);
List<User> list = query
    .where(user.firstName.eq("Bob"))
    .fetch();

For general usage instructions see Querying Lucene sources .

In the query serialization the only difference to the Querydsl Lucene module is that paths are treated differently. For org.hibernate.search.annotations.Field annotated properties the name attribute is used with the property name as fallback for the field name.

Add the following dependencies to your Maven project:

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-apt</artifactId>
  <version>${querydsl.version}</version>
  <scope>provided</scope>
</dependency>

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-mongodb</artifactId>
  <version>${querydsl.version}</version>
</dependency>

<dependency>
  <groupId>org.slf4j</groupId>
  <artifactId>slf4j-log4j12</artifactId>
  <version>1.6.1</version>
</dependency>

And now, configure the Maven APT plugin which generates the query types used by Querydsl:

<project>
  <build>
    <plugins>
      ...
      <plugin>
        <groupId>com.mysema.maven</groupId>
        <artifactId>apt-maven-plugin</artifactId>
        <version>1.1.3</version>
        <executions>
          <execution>
            <goals>
              <goal>process</goal>
            </goals>
            <configuration>
              <outputDirectory>target/generated-sources/java</outputDirectory>
              <processor>com.querydsl.apt.morphia.MorphiaAnnotationProcessor</processor>
            </configuration>
          </execution>
        </executions>
      </plugin>
    ...
    </plugins>
  </build>
</project>

The MorphiaAnnotationProcessor finds domain types annotated with the com.google.code.morphia.annotations.Entity annotation and generates Querydsl query types for them.

Run clean install and you will get your Query types generated into target/generated-sources/java.

If you use Eclipse, run mvn eclipse:eclipse to update your Eclipse project to include target/generated-sources/java as a source folder.

Now you are able to construct Mongodb queries and instances of the query domain model.

Querying with Querydsl Mongodb with Morphia is as simple as this:

Morphia morphia;
Datastore datastore;
// ...
QUser user = new QUser("user");
MorphiaQuery<User> query = new MorphiaQuery<User>(morphia, datastore, user);
List<User> list = query
    .where(user.firstName.eq("Bob"))
    .fetch();

Use the the cascading methods of the MongodbQuery class like this

where: Add the query filters, either in varargs form separated via commas or cascaded via the and-operator. Supported operations are operations performed on PStrings except matches , indexOf , charAt . Currently in is not supported, but will be in the future.

orderBy: Add ordering of the result as an varargs array of order expressions. Use asc() and desc() on numeric, string and other comparable expression to access the OrderSpecifier instances.

limit, offset, restrict: Set the paging of the result. Limit for max results, offset for skipping rows and restrict for defining both in one call.

The syntax for declaring ordering is

query
    .where(doc.title.like("*"))
    .orderBy(doc.title.asc(), doc.year.desc())
    .fetch();

The results are sorted ascending based on title and year.

The syntax for declaring a limit is

query
    .where(doc.title.like("*"))
    .limit(10)
    .fetch();

The syntax for declaring an offset is

query
    .where(doc.title.like("*"))
    .offset(3)
    .fetch();

Support for geospatial queries is available for Double typed arrays (Double[]) via the near-method:

query
    .where(geoEntity.location.near(50.0, 50.0))
    .fetch();

To select only relevant fields you can use the overloaded projection methods fetch, iterate, fetchOne and fetchFirst methods like this

query
    .where(doc.title.like("*"))
    .fetch(doc.title, doc.path);

This query will load only the title and path fields of the documents.

To use querydsl-collections without generated query types you need to use the Querydsl alias feature. Here are some examples.

To get started, add the following static imports:

// needed for access of the Querydsl Collections API
import static com.querydsl.collections.CollQueryFactory.*;
// needed, if you use the $-invocations
import static com.querydsl.core.alias.Alias.*;

And now create an alias instance for the Cat class. Alias instances can only be created for non-final classes with an empty constructor. Make sure your class has one.

The alias instance of type Cat and its getter invocations are transformed into paths by wrapping them into dollar method invocations. The call c.getKittens() for example is internally transformed into the property path c.kittens inside the dollar method.

Cat c = alias(Cat.class, "cat");
for (String name : select($(c.getName())).from($(c),cats)
  .where($(c.getKittens()).size().gt(0))
  .fetch()) {
    System.out.println(name);
}

The following example is a variation of the previous, where the access to the list size happens inside the dollar-method invocation.

Cat c = alias(Cat.class, "cat");
for (String name : select($(c.getName())).from($(c),cats)
  .where($(c.getKittens().size()).gt(0))
  .fetch()) {
    System.out.println(name);
}

All non-primitive and non-final typed properties of aliases are aliases themselves. So you may cascade method calls until you hit a primitive or non-final type (e.g. java.lang.String) in the dollar-method scope.

e.g.

$(c.getMate().getName())

is transformed into c.mate.name internally, but

$(c.getMate().getName().toLowerCase())

is not transformed properly, since the toLowerCase() invocation is not tracked.

Note also that you may only invoke getters, size(), contains(Object) and get(int) on alias types. All other invocations throw exceptions.

The example above can be expressed like this with generated expression types

QCat cat = new QCat("cat");
for (String name : select(cat.name).from(cat,cats)
  .where(cat.kittens.size().gt(0))
  .fetch()) {
    System.out.println(name);
}

When you use generated query types, you instantiate expressions instead of alias instances and use the property paths directly without any dollar-method wrapping.

Add the following dependencies to your Maven project:

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-apt</artifactId>
  <version>${querydsl.version}</version>
  <scope>provided</scope>
</dependency>

<dependency>
  <groupId>com.querydsl</groupId>
  <artifactId>querydsl-collections</artifactId>
  <version>${querydsl.version}</version>
</dependency>

<dependency>
  <groupId>org.slf4j</groupId>
  <artifactId>slf4j-log4j12</artifactId>
  <version>1.6.1</version>
</dependency>

If you are not using JPA or JDO you can generate expression types for your domain types by annotating them with the com.querydsl.core.annotations.QueryEntity annotation and adding the following plugin configuration into your Maven configuration (pom.xml):

<project>
  <build>
  <plugins>
    ...
    <plugin>
      <groupId>com.mysema.maven</groupId>
      <artifactId>apt-maven-plugin</artifactId>
      <version>1.1.3</version>
      <executions>
        <execution>
          <goals>
            <goal>process</goal>
          </goals>
          <configuration>
            <outputDirectory>target/generated-sources/java</outputDirectory>
            <processor>com.querydsl.apt.QuerydslAnnotationProcessor</processor>
          </configuration>
        </execution>
      </executions>
    </plugin>
    ...
  </plugins>
  </build>
</project>

Place the jar files from the full-deps bundle on your classpath and use the following tasks for Querydsl code generation:

    <!-- APT based code generation -->
    <javac srcdir="${src}" classpathref="cp">
      <compilerarg value="-proc:only"/>
      <compilerarg value="-processor"/>
      <compilerarg value="com.querydsl.apt.QuerydslAnnotationProcessor"/>
      <compilerarg value="-s"/>
      <compilerarg value="${generated}"/>
    </javac>

    <!-- compilation -->
    <javac classpathref="cp" destdir="${build}">
      <src path="${src}"/>
      <src path="${generated}"/>
    </javac>

Replace src with your main source folder, generated with your folder for generated sources and build with your target folder.

Querydsl Collections provides Hamcrest matchers. With these imports

import static org.hamcrest.core.IsEqual.equalTo;
import static com.querydsl.collections.PathMatcher.hasValue;
import static org.junit.Assert.assertEquals;
import static org.junit.Assert.assertThat;

they can be used like this:

Car car = new Car();
car.setHorsePower(123);

assertThat(car, hasValue($.horsePower));
assertThat(car, hasValue($.horsePower, equalTo(123)));

The Hamcrest matchers have been contributed by Jeroen van Schagen .

If Querydsl Collections is used with a JRE where the system compiler is not available, CollQuery instances can also be configured to use the Eclipse Compiler for Java (ECJ) instead:

DefaultEvaluatorFactory evaluatorFactory = new DefaultEvaluatorFactory(
    CollQueryTemplates.DEFAULT,
    new ECJEvaluatorFactory(getClass().getClassLoader()));
QueryEngine queryEngine = new DefaultQueryEngine(evaluatorFactory);
CollQuery query = new CollQuery(queryEngine);

Querydsl for Scala provides an alternative DSL for expression construction. The Scala DSL utilizes language features such as operator overloading, function pointers and implicit imports for enhanced readability and conciseness.

Here is an overview of the main alternatives :

//Standard              Alternative

expr isNotNull          expr is not(null)
expr isNull             expr is null
expr eq "Ben"           expr === "Ben"
expr ne "Ben"           expr !== "Ben"
expr append "X"         expr + "X"
expr isEmpty            expr is empty
expr isNotEmpty         expr not empty

// boolean
left and right          left && right
left or right           left || right
expr not                !expr

// comparison
expr lt 5               expr < 5
expr loe 5              expr <= 5
expr gt 5               expr > 5
expr goe 5              expr >= 5
expr notBetween(2,6)    expr not between (2,6)
expr negate             -expr

// numeric
expr add 3              expr + 3
expr subtract 3         expr - 3
expr divide 3           expr / 3
expr multiply 3         expr * 3
expr mod 5              expr % 5

// collection
list.get(0)             list(0)
map.get("X")            map("X")

Like with Querydsl SQL for Java you need to generate Query types to be able to construct your queries. The following code examples show how this is done:

Generation without Bean types :

val directory = new java.io.File("target/jdbcgen1")
val namingStrategy = new DefaultNamingStrategy()
val exporter = new MetaDataExporter()
exporter.setNamePrefix("Q")
exporter.setPackageName("com.querydsl")
exporter.setSchemaPattern("PUBLIC")
exporter.setTargetFolder(directory)
exporter.setSerializerClass(classOf[ScalaMetaDataSerializer])
exporter.setCreateScalaSources(true)
exporter.setTypeMappings(ScalaTypeMappings.create)
exporter.export(connection.getMetaData)

Generation with Bean types :

val directory = new java.io.File("target/jdbcgen2")
val namingStrategy = new DefaultNamingStrategy()
val exporter = new MetaDataExporter()
exporter.setNamePrefix("Q")
exporter.setPackageName("com.querydsl")
exporter.setSchemaPattern("PUBLIC")
exporter.setTargetFolder(directory)
exporter.setSerializerClass(classOf[ScalaMetaDataSerializer])
exporter.setBeanSerializerClass(classOf[ScalaBeanSerializer])
exporter.setCreateScalaSources(true)
exporter.setTypeMappings(ScalaTypeMappings.create)
exporter.export(connection.getMetaData)

<project>
  <build>
    <plugins>
      ...
      <plugin>
        <groupId>com.querydsl</groupId>
        <artifactId>querydsl-maven-plugin</artifactId>
        <version>${querydsl.version}</version>
        <configuration>
          <jdbcDriver>com.mysql.jdbc.Driver</jdbcDriver>
          <jdbcUrl>jdbc:mysql://localhost:3306/test</jdbcUrl>
          <jdbcUser>matko</jdbcUser>
          <jdbcPassword>matko</jdbcPassword>
          <packageName>com.example.schema</packageName>
          <targetFolder>${project.basedir}/src/main/scala</targetFolder>
          <exportBeans>true</exportBeans>
          <createScalaSources>true</createScalaSources>
        </configuration>
        <dependencies>
          <dependency>
            <groupId>mysql</groupId>
            <artifactId>mysql-connector-java</artifactId>
            <version>5.1.16</version>
          </dependency>
          <dependency>
            <groupId>com.querydsl</groupId>
            <artifactId>querydsl-scala</artifactId>
            <version>${querydsl.version}</version>
          </dependency>
          <dependency>
            <groupId>org.scala-lang</groupId>
            <artifactId>scala-library</artifactId>
            <version>${scala.version}</version>
          </dependency>
        </dependencies>
      </plugin>
      ...
    </plugins>
  </build>
</project>

When querying with other backends the Expression model has to be created manually or alternatively the alias functionality can be used.

Here is a minimal example with JPA :

@Entity
class User {
  @BeanProperty
  @Id
  var id: Integer = _;
  @BeanProperty
  var userName: String = _;
  @BeanProperty
  @ManyToOne
  var department: Department = _;
}

@Entity
class Department {
  @BeanProperty
  @Id
  var id: Integer = _;
  @BeanProperty
  var name: String = _;
}

And here are some query examples

List

val person = Person as "person"

selectFrom(person).where(person.firstName like "Rob%").fetch()

Unique result

selectFrom(person).where(person.firstName like "Rob%").fetchOne()

Long where

selectFrom(person)
  .where(person.firstName like "Rob%", person.lastName like "An%")
  .fetch()

Order

selectFrom(person).orderBy(person.firstName asc).fetch()

Not null

selectFrom(person)
  .where(person.firstName isEmpty, person.lastName isNotNull)
  .fetch()

The factory method for query creation is

def query() = new JPAQuery(entityManager)

In addition to queries you need variables which can be created like this

val person = Person as "person"

Note: the Scala support is not yet available if you use Hibernate with an XML based configuration. HibernateDomainExporter currently only outputs Java source files.

To construct complex boolean expressions, use the com.querydsl.core.BooleanBuilder class. It implements Predicate and can be used in cascaded form:

public List<Customer> getCustomer(String... names) {
    QCustomer customer = QCustomer.customer;
    JPAQuery<Customer> query = queryFactory.selectFrom(customer);
    BooleanBuilder builder = new BooleanBuilder();
    for (String name : names) {
        builder.or(customer.name.eq(name));
    }
    query.where(builder); // customer.name eq name1 OR customer.name eq name2 OR ...
    return query.fetch();
}

BooleanBuilder is mutable and represents initially null and after each and or or call the result of the operation.

The com.querydsl.core.types.dsl.Expressions class is a static factory class for dynamic expression construction. The factory methods are named by the returned type and are mostly self-documenting.

In general the Expressions class should be used only in cases where fluent DSL forms can't be used, such as dynamic paths, custom syntax or custom operations.

The following expression

QPerson person = QPerson.person;
person.firstName.startsWith("P");

could be constructed like this if Q-types wouldn't be available

Path<Person> person = Expressions.path(Person.class, "person");
Path<String> personFirstName = Expressions.path(String.class, person, "firstName");
Constant<String> constant = Expressions.constant("P");
Expressions.predicate(Ops.STARTS_WITH, personFirstName, constant);

Path instances represent variables and properties, Constants are constants, Operations are operations and TemplateExpression instances can be used to express expressions as String templates.

In addition to the Expressions based expression creation Querydsl provides also a more fluent API for dynamic path creation.

For dynamic path generation the com.querydsl.core.types.dsl.PathBuilder class can be used. It extends EntityPathBase and can be used as an alternative to class generation and alias-usage for path generation.

Compared to the Expressions API PathBuilder doesn't provide direct support for unknown operations or custom syntax, but the syntax is closer to the normal DSL.

String property:

PathBuilder<User> entityPath = new
PathBuilder<User>(User.class, "entity");
// fully generic access
entityPath.get("userName");
// .. or with supplied type
entityPath.get("userName", String.class);
// .. and correct signature
entityPath.getString("userName").lower();

List property with component type:

entityPath.getList("list", String.class).get(0);

Using a component expression type:

entityPath.getList("list", String.class, StringPath.class).get(0).lower();

Map property with key and value type:

entityPath.getMap("map", String.class, String.class).get("key");

Using a component expression type:

entityPath.getMap("map", String.class, String.class, StringPath.class).get("key").lower();

For PathBuilder validation a PathBuilderValidator can be used. It can be injected in the constructor and will be used transitively for the new PathBuilder

PathBuilder<Customer> customer = new PathBuilder<Customer>(Customer.class, "customer", validator);

PathBuilderValidator.FIELDS will verify field existence, PathBuilderValidator.PROPERTIES validates Bean properties and JPAPathBuilderValidator validates using a JPA metamodel.

To construct case-when-then-else expressions use the CaseBuilder class like this:

QCustomer customer = QCustomer.customer;
Expression<String> cases = new CaseBuilder()
    .when(customer.annualSpending.gt(10000)).then("Premier")
    .when(customer.annualSpending.gt(5000)).then("Gold")
    .when(customer.annualSpending.gt(2000)).then("Silver")
    .otherwise("Bronze");
// The cases expression can now be used in a projection or condition

For case expressions with equals-operations use the following simpler form instead:

QCustomer customer = QCustomer.customer;
Expression<String> cases = customer.annualSpending
    .when(10000).then("Premier")
    .when(5000).then("Gold")
    .when(2000).then("Silver")
    .otherwise("Bronze");
// The cases expression can now be used in a projection or condition

Case expressions are not yet supported in JDOQL.

To avoid a generic signature in expression types the type hierarchies are flattened. The result is that all generated query types are direct subclasses of com.querydsl.core.types.dsl.EntityPathBase or com.querydsl.core.types.dsl.BeanPath and cannot be directly cast to their logical supertypes.

Instead of a direct Java cast, the supertype reference is accessible via the _super field. A _super-field is available in all generated query types with a single supertype:

// from Account
QAccount extends EntityPathBase<Account> {
    // ...
}

// from BankAccount extends Account
QBankAccount extends EntityPathBase<BankAccount> {

    public final QAccount _super = new QAccount(this);

    // ...
}

To cast from a supertype to a subtype you can use the as-method of the EntityPathBase class:

QAccount account = new QAccount("account");
QBankAccount bankAccount = account.as(QBankAccount.class);

Literals can be selected by referring to them via Constant expressions. Here is a simple example

query.select(Expressions.constant(1),
             Expressions.constant("abc"));

Constant expressions are often used in subqueries.

Since Querydsl 3.0 the default type for multi-column results is com.querydsl.core.Tuple. Tuple provides provides a typesafe Map like interface to access column data from a Tuple row object.

List<Tuple> result = query.select(employee.firstName, employee.lastName)
                          .from(employee).fetch();
for (Tuple row : result) {
     System.out.println("firstName " + row.get(employee.firstName));
     System.out.println("lastName " + row.get(employee.lastName));
}}

This example could also have been written via the QTuple expression class like this

List<Tuple> result = query.select(new QTuple(employee.firstName, employee.lastName))
                          .from(employee).fetch();
for (Tuple row : result) {
     System.out.println("firstName " + row.get(employee.firstName));
     System.out.println("lastName " + row.get(employee.lastName));
}}

In cases where Beans need to be populated based on the results of the query, Bean projections can be used like this

List<UserDTO> dtos = query.select(
    Projections.bean(UserDTO.class, user.firstName, user.lastName)).fetch();

When fields should be directly used instead of setters the following variant can be used instead

List<UserDTO> dtos = query.select(
    Projections.fields(UserDTO.class, user.firstName, user.lastName)).fetch();

Constructor based row transformation can be used like this

List<UserDTO> dtos = query.select(
    Projections.constructor(UserDTO.class, user.firstName, user.lastName)).fetch();

As an alternative to the generic Constructor expression usage constructors can also be annotated with the QueryProjection annotation:

class CustomerDTO {

  @QueryProjection
  public CustomerDTO(long id, String name) {
     ...
  }

}

And then you can use it like this in the query

QCustomer customer = QCustomer.customer;
JPQLQuery query = new HibernateQuery(session);
List<CustomerDTO> dtos = query.select(new QCustomerDTO(customer.id, customer.name))
                              .from(customer).fetch();

While the example is Hibernate specific, this feature is available in all modules.

If the type with the QueryProjection annotation is not an annotated entity type, you can use the constructor projection like in the example, but if the annotated type would be an entity type, then the constructor projection would need to be created via a call to the static create method of the query type:

@Entity
class Customer {

  @QueryProjection
  public Customer(long id, String name) {
     ...
  }

}

QCustomer customer = QCustomer.customer;
JPQLQuery query = new HibernateQuery(session);
List<Customer> dtos = query.select(QCustomer.create(customer.id, customer.name))
                           .from(customer).fetch();

Alternatively, if code generation is not an option, you can create a constructor projection like this:

List<Customer> dtos = query
    .select(Projections.constructor(Customer.class, customer.id, customer.name))
    .from(customer).fetch();

The com.querydsl.core.group.GroupBy class provides aggregation functionality which can be used to aggregate query results in memory. Below are some usage examples.

Aggregating parent child relations

import static com.querydsl.core.group.GroupBy.*;

Map<Integer, List<Comment>> results = query.from(post, comment)
    .where(comment.post.id.eq(post.id))
    .transform(groupBy(post.id).as(list(comment)));

This will return a map of post ids to related comments.

Multiple result columns

Map<Integer, Group> results = query.from(post, comment)
    .where(comment.post.id.eq(post.id))
    .transform(groupBy(post.id).as(post.name, set(comment.id)));

This will return a map of post ids to Group instances with access to post name and comment ids.

Group is the GroupBy equivalent to the Tuple interface.

More examples can be found here .

By default Querydsl initializes only reference properties of the first two levels. In cases where longer initialization paths are required, these have to be annotated in the domain types via com.querydsl.core.annotations.QueryInit annotations. QueryInit is used on properties where deep initializations are needed. The following example demonstrates the usage.

@Entity
class Event {
    @QueryInit("customer.address")
    Account account;
}

@Entity
class Account {
    Customer customer;
}

@Entity
class Customer {
    String name;
    Address address;
    // ...
}

This example enforces the initialization of the account.customer path, when an Event path is initialized as a root path / variable. The path initialization format supports wildcards as well, e.g. "customer.*" or just "*".

The automatic path initialization replaces the manual one, which required the entity fields to be non-final. The declarative format has the benefit to be applied to all top level instances of a Query type and to enable the usage of final entity fields.

Automatic path initialization is the preferred initialization strategy, but manual initialization can be activated via the Config annotation, which is described below.

The serialization of Querydsl can be customized via Config annotations on packages and types. They customize the serialization of the annotated package or type.

The serialization options are

Below are some examples.

Customization of Entity type serialization:

@Config(entityAccessors=true)
@Entity
public class User {
    //...
}

Customization of package content:

@Config(listAccessors=true)
package com.querydsl.core.domain.rel;

import com.querydsl.core.annotations.Config;

If you want to customize the serializer configuration globally, you can do this via the following APT options

Using the Maven APT plugin this works for example like this:

<project>
  <build>
  <plugins>
    ...
    <plugin>
      <groupId>com.mysema.maven</groupId>
      <artifactId>apt-maven-plugin</artifactId>
      <version>1.1.3</version>
      <executions>
        <execution>
          <goals>
            <goal>process</goal>
          </goals>
          <configuration>
            <outputDirectory>target/generated-sources/java</outputDirectory>
            <processor>com.querydsl.apt.jpa.JPAAnnotationProcessor</processor>
            <options>
              <querydsl.entityAccessors>true</querydsl.entityAccessors>
              <querydsl.useFields>false</querydsl.useFields>
            </options>
          </configuration>
        </execution>
      </executions>
    </plugin>
    ...
  </plugins>
  </build>
</project>

Alternatively maven-compiler-plugin can be configured to hook APT directly into compilation:

      <project>
        <build>
        <plugins>
          ...
          <plugin>
            <artifactId>maven-compiler-plugin</artifactId>
            <configuration>
              <generatedSourcesDirectory>target/generated-sources/java</generatedSourcesDirectory>
              <compilerArgs>
                <arg>-Aquerydsl.entityAccessors=true</arg>
                <arg>-Aquerydsl.useFields=false</arg>
              </compilerArgs>
            </configuration>
            <dependencies>
              <dependency>
                <groupId>com.querydsl</groupId>
                <artifactId>querydsl-apt</artifactId>
                <version>${querydsl.version}</version>
                <classifier>jpa</classifier>
              </dependency>
              <dependency>
                <groupId>org.hibernate.javax.persistence</groupId>
                <artifactId>hibernate-jpa-2.1-api</artifactId>
                <version>1.0.0.Final</version>
              </dependency>
            </dependencies>
          </plugin>
          ...
        </plugins>
        </build>
      </project>

Notice that you need to use a proper classifier when defining dependency to com.querydsl:querydsl-apt. Those additional artifacts define the annotation processor to be used in META-INF/services/javax.annotation.processing.Processor.

Available classifiers include:

With this configuration query objects can have their sources generated and compiled during compilation of the domain objects. This will also automatically add the generated sources directory to Maven project source roots.

The great advantage of this approach is that it can also handle annotated Groovy classes using groovy-eclipse compiler:

      <project>
        <build>
        <plugins>
          ...
          <plugin>
            <artifactId>maven-compiler-plugin</artifactId>
            <configuration>
              <compilerId>groovy-eclipse-compiler</compilerId>
              <generatedSourcesDirectory>target/generated-sources/java</generatedSourcesDirectory>
              <compilerArgs>
                <arg>-Aquerydsl.entityAccessors=true</arg>
                <arg>-Aquerydsl.useFields=false</arg>
              </compilerArgs>
            </configuration>
            <dependencies>
              <dependency>
                <groupId>org.codehaus.groovy</groupId>
                <artifactId>groovy-eclipse-compiler</artifactId>
                <version>2.9.1-01</version>
              </dependency>
              <dependency>
                <groupId>org.codehaus.groovy</groupId>
                <artifactId>groovy-eclipse-batch</artifactId>
                <version>2.3.7-01</version>
              </dependency>
              <dependency>
                <groupId>com.querydsl</groupId>
                <artifactId>querydsl-apt</artifactId>
                <version>${querydsl.version}</version>
                <classifier>jpa</classifier>
              </dependency>
              <dependency>
                <groupId>org.hibernate.javax.persistence</groupId>
                <artifactId>hibernate-jpa-2.1-api</artifactId>
                <version>1.0.0.Final</version>
              </dependency>
            </dependencies>
          </plugin>
          ...
        </plugins>
        </build>
      </project>

Custom type mappings can be used on properties to override the derived Path type. This can be useful for example in cases where comparison and String operations should be blocked on certain String paths or Date / Time support for custom types needs to be added. Support for Date / Time types of the Joda time API and JDK (java.util.Date, Calendar and subtypes) is built in, but other APIs might need to be supported using this feature.

The following example demonstrates the usage:

@Entity
public class MyEntity {
    @QueryType(PropertyType.SIMPLE)
    public String stringAsSimple;

    @QueryType(PropertyType.COMPARABLE)
    public String stringAsComparable;

    @QueryType(PropertyType.NONE)
    public String stringNotInQuerydsl;
}

The value PropertyType.NONE can be used to skip a property in the query type generation. This case is different from @Transient or @QueryTransient annotated properties, where properties are not persisted. PropertyType.NONE just omits the property from the Querydsl query type.

To declare a static method as a delegate method add the QueryDelegate annotation with the corresponding domain type as a value and provide a method signature that takes the corresponding Querydsl query type as the first argument.

Here is a simple example from a unit test:

@QueryEntity
public static class User {

    String name;

    User manager;

}

@QueryDelegate(User.class)
public static BooleanPath isManagedBy(QUser user, User other) {
    return user.manager.eq(other);
}

And the generated methods in the QUser query type:

public BooleanPath isManagedBy(QUser other) {
    return DelegateTest.isManagedBy(this, other);
}

Delegate methods can also be used to extend built-in types. Here are some examples

public class QueryExtensions {

    @QueryDelegate(Date.class)
    public static BooleanExpression inPeriod(DatePath<Date> date, Pair<Date,Date> period) {
        return date.goe(period.getFirst()).and(date.loe(period.getSecond()));
    }

    @QueryDelegate(Timestamp.class)
    public static BooleanExpression inDatePeriod(DateTimePath<Timestamp> timestamp, Pair<Date,Date> period) {
        Timestamp first = new Timestamp(DateUtils.truncate(period.getFirst(), Calendar.DAY_OF_MONTH).getTime());
        Calendar second = Calendar.getInstance();
        second.setTime(DateUtils.truncate(period.getSecond(), Calendar.DAY_OF_MONTH));
        second.add(1, Calendar.DAY_OF_MONTH);
        return timestamp.goe(first).and(timestamp.lt(new Timestamp(second.getTimeInMillis())));
    }

}

When delegate methods are declared for builtin types then subclasses with the proper delegate method usages are created:

public class QDate extends DatePath<java.sql.Date> {

    public QDate(BeanPath<? extends java.sql.Date> entity) {
        super(entity.getType(), entity.getMetadata());
    }

    public QDate(PathMetadata<?> metadata) {
        super(java.sql.Date.class, metadata);
    }

    public BooleanExpression inPeriod(com.mysema.commons.lang.Pair<java.sql.Date, java.sql.Date> period) {
        return QueryExtensions.inPeriod(this, period);
    }

}

public class QTimestamp extends DateTimePath<java.sql.Timestamp> {

    public QTimestamp(BeanPath<? extends java.sql.Timestamp> entity) {
        super(entity.getType(), entity.getMetadata());
    }

    public QTimestamp(PathMetadata<?> metadata) {
        super(java.sql.Timestamp.class, metadata);
    }

    public BooleanExpression inDatePeriod(com.mysema.commons.lang.Pair<java.sql.Date, java.sql.Date> period) {
        return QueryExtensions.inDatePeriod(this, period);
    }

}

It is possible to create Querydsl query types for non annotated types by creating @QueryEntities annotations. Just place a QueryEntities annotation into a package of your choice and the classes to mirrored in the value attribute.

To actually create the types use the com.querydsl.apt.QuerydslAnnotationProcessor. In Maven you do it like this:

<project>
  <build>
  <plugins>
    ...
    <plugin>
      <groupId>com.mysema.maven</groupId>
      <artifactId>apt-maven-plugin</artifactId>
      <version>1.1.3</version>
      <executions>
        <execution>
          <goals>
            <goal>process</goal>
          </goals>
          <configuration>
            <outputDirectory>target/generated-sources/java</outputDirectory>
            <processor>com.querydsl.apt.QuerydslAnnotationProcessor</processor>
          </configuration>
        </execution>
      </executions>
    </plugin>
    ...
  </plugins>
  </build>
</project>

For cases where annotated Java sources are not available, such as the usage of a different JVM language such as Scala or Groovy or annotation addition via bytecode manipulation the GenericExporter class can be used to scan the classpath for annotated classes and generate query types for them.

To make GenericExporter available add a dependency to the querydsl-codegen module to your project, or to be more precise com.querydsl:querydsl-codegen:${querydsl.version}.

Below is an example for JPA

GenericExporter exporter = new GenericExporter();
exporter.setKeywords(Keywords.JPA);
exporter.setEntityAnnotation(Entity.class);
exporter.setEmbeddableAnnotation(Embeddable.class);
exporter.setEmbeddedAnnotation(Embedded.class);
exporter.setSupertypeAnnotation(MappedSuperclass.class);
exporter.setSkipAnnotation(Transient.class);
exporter.setTargetFolder(new File("target/generated-sources/java"));
exporter.export(DomainClass.class.getPackage());

This will export all the JPA annotated classes in the package of the DomainClass class and subpackages to the target/generated-sources/java directory.

<project>
  <build>
    <plugins>
      ...
      <plugin>
        <groupId>com.querydsl</groupId>
        <artifactId>querydsl-maven-plugin</artifactId>
        <version>${querydsl.version}</version>
        <executions>
          <execution>
            <phase>process-classes</phase>
            <goals>
              <goal>jpa-export</goal>
            </goals>
            <configuration>
              <targetFolder>target/generated-sources/java</targetFolder>
              <packages>
                <package>com.example.domain</package>
              </packages>
            </configuration>
          </execution>
        </executions>
      </plugin>
      ...
    </plugins>
  </build>
</project>

<execution>
  <goals>
    <goal>compile</goal>
  </goals>
  <configuration>
    <sourceFolder>target/generated-sources/scala</targetFolder>
  </configuration>
</execution>

<project>
  <build>
    <plugins>
      ...
      <plugin>
        <groupId>com.querydsl</groupId>
        <artifactId>querydsl-maven-plugin</artifactId>
        <version>${querydsl.version}</version>
        <dependencies>
          <dependency>
            <groupId>com.querydsl</groupId>
            <artifactId>querydsl-scala</artifactId>
            <version>${querydsl.version}</version>
          </dependency>
          <dependency>
            <groupId>org.scala-lang</groupId>
            <artifactId>scala-library</artifactId>
            <version>${scala.version}</version>
          </dependency>
        </dependencies>
        <executions>
          <execution>
            <goals>
              <goal>jpa-export</goal>
            </goals>
            <configuration>
              <targetFolder>target/generated-sources/scala</targetFolder>
              <scala>true</scala>
              <packages>
                <package>com.example.domain</package>
              </packages>
            </configuration>
          </execution>
        </executions>
      </plugin>
      ...
    </plugins>
  </build>
</project>